It’s Instant Comfort® For a Reason

Q: Where can I purchase an Instant Comfort® Mattress and Power Base?

You can purchase an Instant Comfort® bed through one of our trusted retailers. Type in your zip code in our find a store section the website to find the location near you and experience our one of a kind beds. We believe that in today’s world, you should be able to individually customize your level of comfort depending on the way you sleep. That’s why the level of personalization you find in our beds exceeds that of other adjustable air beds on the market today.

Q: How do I contact customer service?

By phone: 1-800-854-6295 or 1-951-273-7888 or by filling out a service request form and we will get back to you within 24-48 hours.

Q: What devices is the app compatible with and what is their range?

This app works with both iPhone and iPad that utilizes iOS 8.0 or later. If you use an Android device the app works best with Samsung Galaxy series tablets and phones, Motorola Moto model phones, and LG model phones. App functionality outside of these devices cannot be guaranteed and will not be supported. The range depends on many factors. Indoor obstacles like concrete walls will obstruct the radio signal and the effective range will be drastically reduced. Also, different devices have different ranges, so connectivity also depends on the device’s bluetooth signal and range. In normal use, ten meters is a good guide to what can be achieved between two Bluetooth devices indoors.

Q: Does Instant Comfort® protect my privacy?

We are committed to protecting your privacy. We use the information we collect on the site to make shopping at safe, secure and as easy as possible. Visit our privacy policy page for more information.

Q: What are cookies? Does Instant Comfort® use them?

Simply put, a cookie is a small piece of information that websites use to remember information about visitors. Instant Comfort® uses two types of cookies to recognize our visitors. We use transient cookies to provide continuity from page to page and they do not contain any personally identifying information. Instant Comfort® uses persistent cookies to identify visitors after their first visit. Learn more about cookies by visiting our privacy policy page.
Back to top

Q: What kind of fuse does your air pump use?

Glass Fuse 1A 250V F1AL250V 5X20mm Quick Blow Glass Tube Fuse Fast Blow Specs: Quick Blow Glass Tube Fuses, Current 1A (F1A), Voltage 250V AC. Size : Ø5 x 20 mm ( 0.2 x 0.8 inch ).

Assembling your number bed is quick and easy. Depending on the model, your Instant Comfort® bed may require assembly and arrive in several boxes or fully assembled in one box. On average, an Instant Comfort® mattress takes around half an hour to fully assemble. For your convenience, you may download printable instructions below.

Firm Comfort

Plush Comfort

Ultra-Plush Comfort

Troubleshooting: Your Mattress

My foam rails are the wrong size

You may have them in upside down, even though you see the “This side up” printing on the side rails. You also need to see “This side up” printed on the center of the fabric that connects the two side rails (we call this area the tray). This is common with Advanced and Elegance Series because their rails are connected by fabric. Please remove and flip your foam rails to make sure that you have unrolled the rails properly. You will want the maximum amount of fabric between them. If there is still fabric is folded under the rail it will not fit properly.

Foam needs to decompress

Please allow up to 30-60 minutes for full expansion. In order to increase efficiency of delivery and packaging, we roll and compress some of our components.

Mattress slopes to the edge or middle

This is generally caused by air chambers that are misplaced or misaligned. You may need to reposition your air chambers. To do so, deflate your mattress to approximately half capacity. Unzip the cover assembly to expose the air chambers and reposition them towards the middle by pushing them together. Make sure they are not constricted by any other foam pieces as well. They should have a very snug fit when properly aligned.

My mattress has bulges or lumps

Sometimes the comfort layers (foam layers) will get hung up on each other so you may need to need to readjust them. Please unzip your top panel mattress cover to expose your comfort layers. Readjust the comfort layers so there is an even distribution of material over your mattress. You may have to completely remove them to reposition properly.

One side of the mattress is losing air overnight

You should not be experiencing any air loss from your mattress. In the rare event that a component may cause a leak, you are covered by the 25 year limited warranty. To start diagnosing the issue please check all connections between the air chambers and the air control unit. Disconnect each fitting, examine the black O-ring for any damage. Lubricate with a non-petroleum based lubricant like mineral oil or vegetable oil (DO NOT USE VASELINE). Reconnect the fittings and make sure you hear a “click” sound when the fitting is secured.
To help identify wether the leak is caused by a defective air chamber or defective air control unit, try switching the hose connections at the air control unit. Re-inflate the mattress and take note of which side of the bed (air chamber) deflates over time (please note: it may take a full sleep cycle to determine where the leak resides). If the leak switched to the other side of the mattress (other air chamber) your air control unit may need to be repaired/replaced. If the leak stayed on same side the mattress your air chamber and/or fitting may need to be repaired/replaced. Please call 1-800-854-6295

"Body impressions" or under inflation

If you would like your mattress to look crisp and new after you get out of bed in the morning, please inflate your mattress to the maximum limit on your controller. If you still feel that your mattress has a body impression and you have fully inflated your mattress please check for leaks (see above). If there are no leaks you may want to unzip and remove the top panel mattress cover and realign the comfort layers (see above) and redistribute the material where you are experiencing the body impression. Compression over time is considered normal wear, please refer to the 25 year limited warranty regarding foam compression.
*The Instant Comfort Mattresses have a lifetime of 25 years. Never Sag™ guarantee ensures that normal foam compression, body impressions and air chamber thickness will not compress to 25% of the overall thickness of the mattress when the air chambers are fully inflated.

New car smell

If you are sensitive to smells and notice a “New car smell” coming from the mattress, this is normal. Your product is a brand new mattress and it’s very similar to that brand “New car smell.” This smell will fade over time. You may wish to unzip your center and/or top panels and let your mattress air out during the day when it’s not in use. After a few days the “new car” smell will dissipate.
Note: A simple trick we’ve learned is to take a few dryer sheets and lay them on top of the air chambers to mask any odor with a fresh laundry scent. Please call us if you have any concerns 1-800-854-6295    ​

Mattress feels like it is losing air

Disconnect your air control unit from your surge protector. Wait for 30 seconds and plug your air control unit into the surge protector. Then follow the same steps as listed above “One side of mattress is losing air throughout the night”

Troubleshooting: Your Hand Control & Air Control Unit

Only one side of air control unit is inflating

If you are setting up your bed for the first time and you notice that only one side of the air control unit seems to be air control uniting air then it’s very likely that the hand control or the air control unit may have received damage during shipping. Although this is very unlikely it still can happen, we do not own the shipping company and can not control how they handle your new product. They do the best they can to prevent damage and we hope that you receive a mattress in perfectly working condition. In the rare event this happens, there is a quick fix to get your bed inflated in order to begin sleeping on your new mattress.
Determine which side is pushing out air by simply adjusting the hand control to a higher number. Air will begin to come out of the side of the air control unit that is working. Please use the working side of your air control unit to fill up both chambers, you will have to disconnect the chamber from the air control unit when complete before you can fill up the other chamber. You can even find a good setting and set both sides where you feel is most comfortable.
After you have properly inflated the mattress and found an acceptable setting, we recommend completely unhooking and removing power to the defective air control unit. Please contact our warranty service department after you have completed this quick fix so you can have a replacement part sent out. Our warranty servicing department is open Monday through Friday from 9:00 AM – 5:30 PM PST and can be reached at 1-800-854-6295 .

Changes and fluctuations of a number bed sleep setting

Some slight fluctuations in your sleep setting is normal. For accuracy, always set your sleep setting while you are laying in bed. Temperature changes and atmospheric changes may slightly affect your sleep setting

Air control unit doesn't turn on or stopped working

Make sure you have power to your surge protector and to your air control unit system. Check to see if the surge protector is plugged into an outlet that has power and not connected to an on/off wall switch. If the electrical outlet is controlled by a switch, make sure the switch is in the ON position. To verify your air control unit system has power the hand control units must be plugged into the air control unit system. Once under power the hand controls will turn on. If the air control unit system still does not turn on please contact customer service by calling 1-800-854-6295.

Hand control displays do not turn on or are not working

Make sure you have power to your surge protector and to your air control unit system. If the air control unit system has a fuse, please check the fuse in the back of the air control unit (not all models come with a fuse). If fuse is blown please replace with a compatible fuse. Please visit our F.A.Q. page to learn more about the specifications required for fuse replacement. Make sure the power cord is completely inserted in the receptacle on the back of the air control unit.

No inflation when air control unit is functioning

Check all hoses from the air control unit to the mattress air chambers for any kinks, twists, or other air flow restrictions. Disconnect each fitting, examine the black O-ring for any damage. Lubricate with a non-petroleum based lubricant like mineral oil or vegetable oil (DO NOT USE VASELINE). Reconnect the fittings and make sure you hear a “click” sound when the fitting is secured.

Air control unit is unresponisve when trying to use hand control

Check to make sure the hand control wires are connected properly to the air control unit and free of any kinks or pinching. Check to see if the air control unit is responsive by changing the setting on the hand control to a different number. If nothing works, please do a hard reset of the air control unit by disconnecting it from power, wait 30 seconds, then reconnect the power (be sure to use a surge protector). Once powered back up please select the “use” option and try to adjust your mattress. If still no reaction from the air control unit please check both remotes to see if one or the other is working. Sometimes one remote may become damaged during shipping.  Our warranty servicing department is open Monday through Friday from 9:00 AM – 5:30 PM PST and can be reached at 1-800-854-6295.

Only one hand control display works

Check to make sure the hand control is properly connected to the air control unit. Inspect all cords to make sure they have not been damaged or cut. Disconnect the non functioning hand control and connect it to the other side of the air control unit. If the hand control continues to be non operational the hand control will need to be repaired or replaced. If the hand control works on one side but not the other, the air control unit may not be functioning properly. Contact customer service at ​1-800-854-6295.

Power outage and mattress functionality

In the event of a power outage your air chambers should remain full and your mattress should stay at the same sleep setting.
Once you regain power, you may need to reset your air control unit by unplugging it from the surge protector, wait 30 seconds, and reconnect to reset the system.

Power outage and hand control memory settings

In the event of a power outage your hand controls will still remember your memory settings after you have regained power.

Mattress deflates or lowers during use

The air control unit system is run by software to control how the air control unit inflates and deflates your air chambers. If the software seems to not react properly to your commands there is a good chance your air control unit has to perform a power cycle. This is very similar to restarting your computer when things start acting up. We recommend you unplug your air control unit from your surge protector, wait 30 seconds, and plug it back in to reset the system.​

For further support, contact us.

Please Fill Out Contact Form Below

Instant Comfort®

Toll Free: 1 (800) 854-6295

252 Mariah Circle, Corona, CA 92879-1751

Instant Comfort® User Guide

Thank you for purchasing an Instant Comfort® mattress, The Number Bed That Changes With You. We’re excited for you to experience a sleep system that’s easy to control and tailored to your exact comfort needs. As your needs change, this bed changes with you.

In this guide, we will provide tips on finding your optimal setting—which, of course, can change whenever you need it to. The goal is customized comfort and quality sleep.



Instant Comfort® User Guide PDF